Guide · Food manufacturers · 4 min read · Updated 17 November 2026
Food Factory Flooring Requirements in the UK
Short answer
UK food factory floors must be kept in sound condition and be easy to clean and, where necessary, disinfect under food hygiene law, which usually means impervious, non-absorbent and washable surfaces. In practice, many food plants use polyurethane screeds at £55–£95 per m² with integral coving, falls to drains and textured anti-slip finishes that cope with hot washdowns and thermal shock.
What food hygiene law requires
Food business operators must keep floor surfaces in sound condition and easy to clean and, where necessary, disinfect. That generally means using impervious, non-absorbent, washable and non-toxic materials, unless the business can show other materials are appropriate. Floors should also allow adequate surface drainage where needed.
Environmental health officers and customer auditors look at floors closely. Cracks, failed joints, damaged areas and gaps at wall junctions all harbour bacteria and make cleaning less effective. A sound, jointless floor is one of the foundations of good hygiene in a food plant.
- Sound condition, free from cracks and holes
- Impervious and non-absorbent surface
- Washable and suitable for disinfection
- Adequate drainage where floors are washed
- Sealed junctions with walls and fittings
Why polyurethane screeds are common
Food production floors face heavy demands. They are washed with hot water, cleaned with chemicals and exposed to fats, sugars, acids, blood and other food residues. Areas near ovens, fryers and freezers see big temperature swings. Polyurethane screeds are designed to resist thermal shock, chemicals and impact in these conditions.
They are laid at 6–9 mm thick, which helps them cope with heavy wheeled equipment and dropped items. Jointless installation avoids joints where dirt collects. Integral coving at walls and textured finishes for slip resistance make them a common choice for wet production areas.
For areas where heavy wheeled racks and bins travel constantly, thicker screeds and reinforced joints are worth the extra cost. Damage around doorways, drains and loading points tends to appear first, so these areas should be specified with the toughest details in the plan.
| Area | Typical floor | Guide price |
|---|---|---|
| Wet production with hot washdowns | Polyurethane screed (6–9 mm) | £55–£95 per m² |
| Dry packing and stores | Self-smoothing epoxy (2–4 mm) | £35–£60 per m² |
| Light-duty dry areas | High-build epoxy coating | £20–£40 per m² |
| Failed joints on routes | Concrete joint repair | £40–£120 per linear metre |
Coving, drainage and details
Coving is a curved transition between floor and wall that removes the sharp corner where dirt builds up. In food areas, it is usually formed in the same resin as the floor so it is jointless. Upstands around machinery plinths and columns follow the same principle.
Drainage matters wherever floors are washed. Floors should fall towards drains or channels so water does not pool. Getting falls right often means building up the floor in places before the final system goes down. Junctions between the resin floor and stainless steel drains must be sealed properly, as they are a common point of failure.
Penetrations through the floor, such as pipe supports, machine fixings and drain bodies, need careful sealing. Water tracking down the side of a fixing can travel under the resin and cause the floor to lift. A good installer details each penetration rather than simply running the resin up to it.
Slip resistance in wet areas
Wet, greasy floors are a serious slip risk. The Workplace (Health, Safety and Welfare) Regulations 1992 require floors not to be slippery so far as reasonably practicable. Textured resin finishes with aggregate improve grip, and the texture can be increased in areas with fats or oils.
The texture must still be cleanable. Too rough a surface traps food residue and makes cleaning harder. Agree the finish with the contractor based on actual contamination and the cleaning method used, and update cleaning equipment if needed.
- Medium texture for regularly wet floors
- Coarser texture near fryers and fat handling
- Smoother finish in dry packing areas
- Extra grip on ramps and slopes
Planning work around production
Food plants rarely have long shutdowns, so flooring work is often carried out over weekends, holidays or in phases. Some polyurethane systems cure quickly enough to allow return to service within a short window. Odour is another consideration, as some resins smell during application. Low-odour systems are available for food environments.
The work area must be separated from live production to prevent dust and contamination. Shot blasting and grinding produce dust, and the Control of Substances Hazardous to Health Regulations 2002 apply to both dust and resin products. A clear method statement and programme should be agreed in advance.
Allergen control is another reason to plan carefully. Dust from preparation can spread through a site if it is not contained, so screens, negative pressure and thorough cleaning before production restarts are part of a well-run food plant flooring job.
Maintaining a food factory floor
Even the best floor needs care. Follow the cleaning method agreed with the installer, avoid chemicals the system is not rated for and repair damage quickly. Small cracks or chips let water under the resin and grow if ignored.
Regular inspection, particularly around drains, joints and machinery, catches problems early. Planning repairs during normal shutdowns avoids emergency work. We confirm one fixed price for new floors or repairs after a site survey.
Customer audits and environmental health visits often comment on floors, so keeping a record of inspections and repairs helps show the floor is being managed. A short checklist used weekly by the hygiene team is a simple way to spot damage early.
Questions people also ask
What flooring is best for a food factory?
For wet production areas with hot washdowns, polyurethane screeds are widely used because they resist heat, chemicals and impact. Dry packing areas and stores often use epoxy systems. The best choice depends on conditions in each area.
Does a food factory floor need coving?
Coving is strongly recommended in food areas because it removes the corner between floor and wall where dirt collects. It makes cleaning easier and supports hygiene requirements. Coving is usually formed in the same resin as the floor.
Can a food factory floor be installed without closing?
Often yes, with phased working, weekend or holiday installation and fast-cure systems. The work area must be separated from production to prevent contamination. Plan the programme with the contractor well in advance.
Written and checked by the Factory Flooring team. Read our editorial policy.
More guides
How Much Does Factory Flooring Cost in the UK?
Factory flooring in the UK costs £12–£25 per m² for a light epoxy seal, £20–£40 per m² for high-build epoxy and £35–£60 per m² for 2–4 mm…
Epoxy vs Polyurethane Factory Flooring: Which Is Best?
Epoxy flooring suits dry warehouses, workshops and light to medium manufacturing. It is hard, durable and costs £20–£60 per m² depending on…
How Resin Factory Floors Are Installed: Step by Step
A resin factory floor is installed in stages. The contractor surveys and moisture-tests the slab, prepares it by shot blasting or diamond grinding,…
Anti-Slip Factory Flooring: Rules, Testing and Options
UK workplace floors must not be slippery so far as reasonably practicable under the Workplace (Health, Safety and Welfare) Regulations 1992. Slip…
Get a free factory flooring quote
Tell us what you need and we'll come back with a clear price.
Request a quote