Factory Flooring

Factory Flooring

Polyurethane and Heavy-Duty Screeds

Polyurethane screeds that resist thermal shock, hot washdowns, chemicals and heavy impact in food and drink production areas.

Free Factory Flooring quote

No obligation. We only use your details to reply about this job.

Polyurethane and Heavy-Duty Screeds — Factory Flooring

What's involved

Polyurethane screeds, often called PU cement or PU concrete, are the go-to choice for food, drink and pharmaceutical production. They are typically laid at 6 mm to 9 mm thick, with heavier grades for areas exposed to boiling water, steam cleaning or hot oil. Unlike epoxy, PU screeds tolerate thermal shock and remain stable under repeated temperature changes, so they suit cookhouses, dairies, breweries and freezers. The contractor prepares the concrete by grinding or blasting, cuts anchor grooves at edges, drains and joints so the screed locks in, and installs coved skirtings to create a hygienic, easy-clean junction between floor and wall. The screed is trowelled to a textured finish for slip resistance. Fast-curing systems can be trafficked within 24 hours. You will need to plan drainage falls, gully positions and production shutdown with the contractor well in advance.

How we handle it

  1. Site survey and testing

    The contractor visits to assess the floor, traffic, chemicals, temperatures and cleaning regime. They test concrete moisture, surface strength and contamination, and note drainage, joints and problem areas.

  2. Specification and quote

    You receive a specification describing the preparation method, system type, thickness, finish and colour, plus a quote and programme that shows how long each area will be out of use.

  3. Planning the shutdown

    Work is scheduled around production, often over weekends, shutdowns or in phases. Areas are cleared of stock and machinery, and temperature and ventilation are arranged.

  4. Preparation and installation

    Concrete is shot blasted or ground, repaired and primed. The resin or screed system is installed in layers, with anti-slip aggregate, coving and markings as specified.

  5. Curing and handover

    The floor is left to cure before foot and vehicle traffic resumes. The contractor inspects the work with you and provides maintenance and cleaning guidance.

Price guide

Factory flooring is usually priced per square metre, with costs depending on the system, thickness and how much preparation the existing concrete needs. Large areas get lower rates, while small or complex areas with coving, drains and repairs cost more. Weekend and shutdown working affects the price. These are typical UK guide prices for 2026.

  • Shot blasting preparation: £5–£12 per m². Surface preparation before coatings; heavy contamination or grinding costs more.
  • Concrete joint repair: £40–£120 per linear metre. Cutting out and rebuilding failed joints on forklift routes.
  • Polyurethane screed (6–9 mm): £55–£95 per m². Food and drink production areas with hot washdowns and chemicals.

Questions about polyurethane and heavy-duty screeds

What is the difference between epoxy and polyurethane flooring?

Epoxy is hard, strong and chemically resistant, and suits most dry or moderately wet areas. Polyurethane is more flexible and handles thermal shock, so it suits steam cleaning, hot washdowns and freezers. PU screeds are common in food production, while epoxy is common in warehouses and workshops.

Get a free factory flooring quote

Tell us what you need and we'll come back with a clear price.

Request a quote