Factory Flooring FAQs
Straight answers to the questions we're asked most.
How much does factory flooring cost per square metre?
Factory flooring typically costs £12 to £25 per m² for a thin epoxy coating, £35 to £60 for self-smoothing epoxy, and £55 to £95 for polyurethane screed in 2026. Preparation, repairs, coving and drains add to the price. Large areas usually get lower rates per square metre.
What is the best flooring for a factory?
It depends on the process. Epoxy resin suits most warehouses, workshops and light manufacturing. Polyurethane screed is better for food, drink and areas with hot washdowns or thermal shock. Heavy engineering may need thick resin mortars. A contractor should assess traffic, chemicals and temperature first.
How long does resin flooring last?
A well-installed epoxy coating typically lasts five to ten years under normal industrial use, while thicker self-smoothing and polyurethane screed systems can last ten to twenty years. Life depends on traffic, impact, chemicals, cleaning and, above all, how well the concrete was prepared.
What is the difference between epoxy and polyurethane flooring?
Epoxy is hard, strong and chemically resistant, and suits most dry or moderately wet areas. Polyurethane is more flexible and handles thermal shock, so it suits steam cleaning, hot washdowns and freezers. PU screeds are common in food production, while epoxy is common in warehouses and workshops.
How long does factory floor installation take?
Small areas can be completed in one to three days, including preparation and curing. Large or complex areas take longer and are often phased. Most epoxy systems take foot traffic within 24 hours and full vehicle traffic after several days, depending on temperature.
Can resin flooring be laid on new concrete?
Yes, but the concrete must be dry enough first, which can take weeks or months depending on thickness and conditions. Moisture testing is essential. Some moisture-tolerant primers allow earlier installation, but laying on wet concrete without them can cause blistering and failure.
Why is my factory floor coating peeling?
Peeling usually means poor preparation, such as coating over laitance, dust, oil or old paint. Moisture rising through the slab and incompatible products also cause failure. The fix normally involves removing the failed coating, preparing the concrete properly and reapplying a suitable system.
Is resin flooring slippery?
Smooth resin can be slippery when wet or oily, but anti-slip aggregates can be added to give the grip your process needs. The right level of texture balances slip resistance with ease of cleaning. Contractors can advise on the best finish for your conditions.
Can factory flooring be installed without stopping production?
Often, yes. Contractors can phase work by area, work overnight or at weekends, and use fast-curing systems that return to service within hours. Some disruption is unavoidable, so planning with the contractor early helps minimise downtime.
What flooring do food factories need?
Food factories need jointless, impervious and easy-to-clean floors with coved skirtings, adequate falls to drains and suitable slip resistance. Polyurethane screed is commonly used because it resists hot water, fats and cleaning chemicals, and handles temperature changes.
How do you repair damaged concrete joints?
Failed joints are cut out, cleaned and rebuilt with fast-setting resin mortars, then refilled with a semi-rigid joint filler. Heavy-traffic routes may need armoured joints. Repairs can often be done overnight so forklift routes are back in use the next day.
Do resin floors smell during installation?
Some resin systems give off an odour while curing, especially certain epoxy and methyl methacrylate products. Contractors use ventilation and low-odour products where needed. Food areas must be protected from contamination, so planning with the contractor is important.
Get a free factory flooring quote
Tell us what you need and we'll come back with a clear price.
Request a quote