Factory Flooring

Guide · Businesses · 4 min read · Updated 17 November 2026

Epoxy vs Polyurethane Factory Flooring: Which Is Best?

Short answer

Epoxy flooring suits dry warehouses, workshops and light to medium manufacturing. It is hard, durable and costs £20–£60 per m² depending on thickness. Polyurethane screeds suit food and drink production, wet areas and places with hot washdowns or thermal shock, costing £55–£95 per m². Polyurethane copes better with heat and temperature changes, while epoxy is often the economical choice for dry areas.

Epoxy vs Polyurethane Factory Flooring: Which Is Best?

How the two systems differ

Both epoxy and polyurethane are resin systems mixed on site and laid onto prepared concrete. Epoxy cures to a very hard, rigid surface with strong adhesion and good resistance to abrasion and many chemicals. It is widely used for coatings and self-smoothing floors in warehouses, workshops and assembly areas.

Polyurethane systems, especially polyurethane concrete screeds, are more flexible and tolerate heat and sudden temperature changes much better. That makes them common in food and drink production, commercial kitchens and areas cleaned with hot water or steam. They are usually laid thicker, which also helps absorb impacts.

PropertyEpoxyPolyurethane screed
Typical thicknessCoating to 2–4 mm self-smoothing6–9 mm screed
Guide price£20–£60 per m²£55–£95 per m²
Heat and thermal shockLimitedGood
Wet and washdown areasFair, depends on systemGood
Dry warehouses and workshopsVery goodGood but often more than needed
UV colour stabilityCan yellow in sunlightVaries by system

When epoxy is the right choice

Epoxy is a strong choice for dry environments with forklift traffic, pallet trucks and general foot traffic. High-build coatings suit warehouses and workshops, while 2–4 mm self-smoothing epoxy gives a jointless, durable surface for busy manufacturing, electronics assembly or clean areas. It can be given an anti-slip finish by broadcasting aggregate into the surface.

Epoxy is generally less expensive than polyurethane screed for the same area, which makes it attractive for large dry spaces. It also comes in a wide range of colours, useful for zoning areas or marking walkways. Its weakness is heat: hot water, steam cleaning and sudden temperature changes can cause cracking or loss of bond.

For warehouses with very heavy pallet traffic, a thicker self-smoothing epoxy at 2–4 mm usually outlasts a thin coating many times over. The extra thickness spreads the load from wheels and absorbs scuffs, so the surface looks better for longer and needs recoating less often. In narrow aisle warehouses, flatness matters too, so the existing slab may need grinding before any coating goes down.

  • Warehouses and distribution centres
  • Engineering workshops and assembly areas
  • Electronics and light manufacturing
  • Plant rooms and dry stores
  • Showrooms and service areas

When polyurethane is the right choice

Polyurethane screeds earn their higher price in harsh conditions. Food and drink plants often wash floors with hot water, use steam cleaning and spill fats, sugars, acids and other food products that attack weaker floors. Polyurethane systems are designed to resist these conditions, flex slightly with temperature changes and stay bonded.

They are also used near ovens, fryers, blast chillers and freezers, where floors can see large temperature swings. Because they are laid thicker, they tolerate heavy impacts from dropped tools or containers. Many systems can be finished with a textured surface to provide slip resistance in wet areas.

Because polyurethane screeds are laid thicker, they also cover minor surface irregularities better than a thin coating. That can reduce the amount of levelling work needed on older food plant floors, although badly damaged or uneven slabs still need repair first.

Slip resistance and hygiene

Both systems can be made more slip resistant by adding aggregate during installation. The right texture depends on what contaminates the floor. Water needs some texture. Oils, fats and greases need more. Too much texture makes cleaning harder, so the finish should balance grip against cleanability.

In food areas, floors must be kept in sound condition and be easy to clean and, where necessary, disinfect under food hygiene law. Jointless resin floors with coving at wall junctions avoid joints and corners where dirt collects. Polyurethane screeds with integral coving and falls to drains are common in food production for this reason.

Installation and downtime

Epoxy systems are applied as primers, body coats and topcoats, each needing time to cure. They are sensitive to temperature and humidity during application. Polyurethane screeds are mixed with aggregate and trowelled or spread in one main layer, with primers and sealers. Some polyurethane systems allow quicker return to service, which helps food plants with short shutdown windows.

For either system, preparation is critical. Shot blasting or diamond grinding removes weak surface material and contamination, and moisture testing checks whether the slab is dry enough. Damp-tolerant primers can help where moisture is present, but serious damp problems need assessing before any resin floor is laid.

Making the decision

Start with the conditions on the floor rather than the price per square metre. List the traffic, temperatures, cleaning methods and chemicals in each area. Dry areas usually suit epoxy. Wet, hot or chemically aggressive areas usually justify polyurethane. Many factories use both, with polyurethane in production and epoxy in dry stores and corridors.

A survey confirms the right system for each zone and gives one fixed price covering preparation and installation. Choosing correctly the first time avoids the cost of replacing a floor that fails within a few years.

If you are unsure, ask for the contractor's reasoning for each area in writing. A good specification explains why a system suits the conditions, how thick it will be, what texture is planned and how long it should be left before full use. That makes it easier to compare quotes on a like-for-like basis.

Questions people also ask

Is polyurethane flooring stronger than epoxy?

Not necessarily stronger, but more tolerant of heat, thermal shock and flexing. Epoxy is very hard and abrasion resistant. Polyurethane screeds are thicker and more flexible, so they cope better with hot washdowns and temperature changes. The right choice depends on conditions.

Can epoxy flooring be used in food factories?

Epoxy can be used in dry food areas such as packing rooms or dry stores. For wet production areas with hot water or steam cleaning, polyurethane screeds are usually preferred because epoxy can crack or lose adhesion under thermal shock.

How long does epoxy or polyurethane flooring last?

Life depends on traffic, cleaning and how well the floor was prepared. A properly specified and installed system can last many years before needing a recoat or repair. Thin coatings in heavy traffic areas wear faster than thick screeds.

Written and checked by the Factory Flooring team. Read our editorial policy.

Get a free factory flooring quote

Tell us what you need and we'll come back with a clear price.

Request a quote