Factory Flooring

Cornwall · South West

Factory Flooring in Truro

Industrial sites in Truro, Camborne and St Austell use us to find contractors for epoxy, PU screed and anti-slip flooring.

Fix slippery floors at your Truro site.

Free Factory Flooring quote in Truro

No obligation. We only use your details to reply about this job.

Our Truro coverage

Truro falls within Cornwall, South West. Jobs here are mostly in the TR1 and TR3 postcode areas. The same team covers Carnon Downs and Threemilestone too.

Local considerations in Truro

Travel to rural sites near Truro is factored in, and larger areas help spread mobilisation costs. Farm buildings converted to industrial use near Truro often need repairs and levelling before coatings are applied.

The South West mixes stone-built towns, rendered cottages and newer estates, and its western coasts see some of England's wettest, windiest weather. Older factory floors in Truro may lack a damp-proof membrane, so moisture-tolerant primers may be needed.

How much it costs in Truro

  • Self-smoothing epoxy (2–4 mm): £35–£60 per m². Jointless, durable floor for busy manufacturing and clean areas.
  • Polyurethane screed (6–9 mm): £55–£95 per m². Food and drink production areas with hot washdowns and chemicals.
  • Concrete joint repair: £40–£120 per linear metre. Cutting out and rebuilding failed joints on forklift routes.

Prices are a guide. Your quote for Truro is a fixed price based on the details you give us. Full price guide.

Factory Flooring questions from Truro

Can you work around production in Truro?

Yes. Contractors covering Truro regularly phase work, work weekends or use shutdowns, and choose fast-curing systems to reduce downtime.

Do you test concrete before coating in Truro?

Yes. Contractors covering Truro test moisture and surface strength before installation, which is essential for a long-lasting floor.

Do you cover Camborne and St Austell as well as Truro?

Yes. Our network covers Truro, Camborne, St Austell and the wider the South West area.

Do you install food-safe flooring in Truro?

Yes. Contractors covering Truro and Camborne install PU screeds with coving and drains for food and drink production areas.

Why is my factory floor coating peeling?

Peeling usually means poor preparation, such as coating over laitance, dust, oil or old paint. Moisture rising through the slab and incompatible products also cause failure. The fix normally involves removing the failed coating, preparing the concrete properly and reapplying a suitable system.

Do resin floors smell during installation?

Some resin systems give off an odour while curing, especially certain epoxy and methyl methacrylate products. Contractors use ventilation and low-odour products where needed. Food areas must be protected from contamination, so planning with the contractor is important.

Get a free factory flooring quote in Truro

Tell us what you need and we'll come back with a clear price.

Request a quote