Factory Flooring

Hampshire · South East

Factory Flooring in Romsey

If your production floor in Romsey is cracked, peeling or slippery, we can match you with a vetted industrial flooring contractor in the South East.

Get a factory flooring quote in Romsey.

Free Factory Flooring quote in Romsey

No obligation. We only use your details to reply about this job.

Where we work around Romsey

Romsey falls within Hampshire, South East. Jobs here are mostly in the SO51 postcode areas. We also take jobs in Chandler's Ford, North Baddesley, Rownhams and Nursling.

Factory Flooring in Romsey: local know-how

Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Fresh concrete on new builds near Romsey needs time to dry, and contractors test moisture before installing coatings.

Rural workshops around Romsey may have older concrete with no damp-proof membrane, so moisture testing is essential. Agricultural and food processing sites near Romsey often need PU screeds that cope with washdowns and temperature changes.

Typical costs in Romsey

  • Epoxy floor seal or thin coating: £12–£25 per m². Light-duty coating on prepared concrete for stores and low-traffic areas.
  • Shot blasting preparation: £5–£12 per m². Surface preparation before coatings; heavy contamination or grinding costs more.
  • Concrete joint repair: £40–£120 per linear metre. Cutting out and rebuilding failed joints on forklift routes.

Prices are a guide. Your quote for Romsey is a fixed price based on the details you give us. Full price guide.

Factory Flooring questions from Romsey

Do you test concrete before coating in Romsey?

Yes. Contractors covering Romsey test moisture and surface strength before installation, which is essential for a long-lasting floor.

Do you cover Totton and Southampton as well as Romsey?

Yes. Our network covers Romsey, Totton, Southampton and the wider the South East area.

Do you install food-safe flooring in Romsey?

Yes. Contractors covering Romsey and Totton install PU screeds with coving and drains for food and drink production areas.

How do I get a factory flooring quote in Romsey?

Use our quote form with your site in Romsey, the floor area, your process and photos. A local contractor will arrange a survey and quote.

What is the best flooring for a factory?

It depends on the process. Epoxy resin suits most warehouses, workshops and light manufacturing. Polyurethane screed is better for food, drink and areas with hot washdowns or thermal shock. Heavy engineering may need thick resin mortars. A contractor should assess traffic, chemicals and temperature first.

Why is my factory floor coating peeling?

Peeling usually means poor preparation, such as coating over laitance, dust, oil or old paint. Moisture rising through the slab and incompatible products also cause failure. The fix normally involves removing the failed coating, preparing the concrete properly and reapplying a suitable system.

Get a free factory flooring quote in Romsey

Tell us what you need and we'll come back with a clear price.

Request a quote