Factory Flooring

Angus · Scotland

Factory Flooring in Arbroath

If your production floor in Arbroath is cracked, peeling or slippery, we can match you with a vetted industrial flooring contractor in Scotland.

Get a factory flooring quote in Arbroath.

Free Factory Flooring quote in Arbroath

No obligation. We only use your details to reply about this job.

Covering Arbroath and nearby

We cover all of Arbroath and the wider Angus area. That includes the DD11 postcode districts.

What to expect in Arbroath

In Scotland, building warrants are issued by the local council, and much of the older stock is stone-built with harling or render. Older industrial buildings in Arbroath may have worn, oil-soaked concrete that needs cutting out or deep cleaning before coating. Seafood processors and coastal food plants near Arbroath need hygienic, chemical-resistant floors that withstand frequent washdowns. Food and drink producers in Scotland, including distilleries near Arbroath, often need floors that resist heat, moisture and cleaning chemicals.

Farm buildings converted to industrial use near Arbroath often need repairs and levelling before coatings are applied. Rural workshops around Arbroath may have older concrete with no damp-proof membrane, so moisture testing is essential.

Factory Flooring prices in Arbroath

  • Epoxy floor seal or thin coating: £12–£25 per m². Light-duty coating on prepared concrete for stores and low-traffic areas.
  • Shot blasting preparation: £5–£12 per m². Surface preparation before coatings; heavy contamination or grinding costs more.
  • Concrete joint repair: £40–£120 per linear metre. Cutting out and rebuilding failed joints on forklift routes.

Prices are a guide. Your quote for Arbroath is a fixed price based on the details you give us. Full price guide.

Factory Flooring questions from Arbroath

How long will factory flooring take in Arbroath?

Small areas in Arbroath can be completed in one to three days. Large or complex projects are phased and may take weeks.

Can you repair concrete joints in Arbroath?

Yes. Contractors in Arbroath cut out and rebuild failed joints with fast-setting materials, often overnight so forklift routes reopen quickly.

How much does factory flooring cost in Arbroath?

Epoxy coatings typically cost £12 to £40 per m², self-smoothing epoxy £35 to £60, and PU screeds £55 to £95. Contractors covering Arbroath will quote after surveying your floor and process.

Can you fix a slippery factory floor in Arbroath?

Yes. Contractors covering Arbroath can add anti-slip coatings or textured finishes suited to your process and cleaning regime.

Can resin flooring be laid on new concrete?

Yes, but the concrete must be dry enough first, which can take weeks or months depending on thickness and conditions. Moisture testing is essential. Some moisture-tolerant primers allow earlier installation, but laying on wet concrete without them can cause blistering and failure.

Why is my factory floor coating peeling?

Peeling usually means poor preparation, such as coating over laitance, dust, oil or old paint. Moisture rising through the slab and incompatible products also cause failure. The fix normally involves removing the failed coating, preparing the concrete properly and reapplying a suitable system.

Get a free factory flooring quote in Arbroath

Tell us what you need and we'll come back with a clear price.

Request a quote